Puffco Peak Vaporizer

Select Vape presents the Puffco Peak by (Puffco). Introducing one of the most sought after E-Rig (electronic rig), the Peak features a built in bubbler, beautiful ergonomic design and powerful heating elements. The Peak operates by electronically heating up your loaded concentrates onto the atomizer and waiting until the LED light flashes three times to notify the user that it is ready. This device can also be used as a traditional dab rig by preheating the atomizer before applying the concentrates inside and covering it with the cap. Either option works perfectly and you will be satisfied with the results.

The Peak utilizes four different temperature presets in increments of 50F (450F/500F/550F/600F) which allows the device to cater towards a wider variety of substances and load sizes. This Puffco Peak provides an amazing vapor quality as the water filtration smooths down the vapor before reaching the user’s lungs while maintaining the flavor. Each and every hit you take from the Peak is filled with flavor that is strong and potent. The Peak provides between 15 to 20 strong draws before needing to be recharged. This device charges using a standard Micro USB cable and takes around 2 hours to fully recharge from empty to full.

Compatible Accessories:

• The Peak Atomizer
• The Peak Travel Pack
• The Peak Bowl
• The Peak Glass
• The Peak Ball Cap
• The Peak Carb Cap
• Puffco Peak Dual Tool

See What Customers Are Saying:

• “The Puffco Peak is designed for one-handed use since it has a single button on the front that is used for adjusting the preset temperatures. The Peak also has haptic feedback, as it vibrates when the device has finished heating.”
• “With a ceramic bowl and water filtration, the vapor quality of the Peak is always going to be great. Even though the Peak device doesn’t have precise temperature control like some other e-nails, the preset temperatures work amazing. I received the best flavor quality from the two middle settings; if you would like the device to emit the biggest clouds, you can crank the setting to the max.”
• “The Peak is perfect for those who like to have a smoke session with multiple people. This device is designed for the user to pass from person to person and merely double tapping it to reheat. This device makes it feel a lot more like a smoke session with a bong, pipe or joint. It is much less intimidating for a person new to dabbing to use the peak than a torch setup or even an e-nail.”

Features and Specs:

How to Use:

1. Remove the glass bubbler from the base and fill it with water to just above the air holes.
2. Attach the bubbler to the base, then hold down the power button for three seconds to power up the vaporizer.
3. Dab your max into the bottom of the ceramic bowl then cover the bowl with the carb cap.
4. Double click the power button to start the heating process.
5. The peak will vibrate and the LED light will blink three times to indicate when heating is complete.
6. Inhale from the bubbler to start vaping.

Cleaning and Maintenance:

• You can place the cleaning swabs in isopropyl alcohol before use them to wipe down the ceramic bowl. For the bubbler, you can pour a bit of isopropyl alcohol inside, swish it around and pour it out. Then you rinse out the bubbler with warm water. Overall the Peak requires very low maintenance since all you need to do is clear the glass bubbler and ceramic bowl.

You Receive:

• Puffco Peak device
  • Carrying Case
  • Tether
  • Cleaning Swabs
  • Loading Tool
  • Micro USB Cable & Super Charger
  • Extra Ceramic Bowl
  • Carb Cap